Easy Tips to Improve Heating and Cooling your Home

On February 6, 2015 by Melissa Hamler

The fact is that most people waste money and energy when it comes to heating and cooling their homes. The methods they use turn out to be inefficient. This inefficiency could be a result of poor insulation and sealants or due to the bad choices of heating and cooling systems.

Heating

These decisions can end up costing a lot of money. Of course, there is an also a wastage of energy. There are very simple tips that can reduce the energy and money required whilst ensuring proper heating and cooling of your home. 

Cooler

Protection against Draughts

 

This is by far the easiest step that you can take to improve the efficiency of your home when it comes to heating and cooling.

  • The major sources of draught are windows and doors. These can bring in cold or hot air depending on the season. These sources need to be very carefully insulated.
  • Curtains and blinds should be fully drawn in order to ensure that the cold or warm air is trapped inside the room. This will keep the room more comfortable.
  • Glazing your windows could prove to be a good solution. You can opt for double or triple glazing. Even though they you are expensive they can significantly improve the heating and cooling of your house.
  • A rug can be laid down during the winter in order to increase the comfort levels.
  • Locate and seal any gaps or cracks in windows and doors through which draught can enter.

Insulation of Homes

 

Elimination of draughts is possible with just a simple step. In order to ensure the best results for maintaining a comfortable temperature in your home, you need to correctly insulate it.

  • Ceiling or attic insulation is very important when you want to maintain the temperature in your home. There is usually a minimum level of insulation that is required. You can increase the insulation in order to ensure better temperature performance of your cooling and heating systems.
  • You also need to check the insulation condition under the floor. Many homes forget this vital area while implementing insulation measures. Especially the timber floors need to have a reinforced insulation system. On the other hand concrete rarely calls for any extra insulation measures.

Selection of the Correct System

 

The system you use for heating or cooling the house is surely going to be responsible for maintaining the correct temperature. Selecting the correct appliance can eliminate a lot of heating and cooling problems in the future. The choice will certainly depend on many factors.

  • The cost will make a big impact on the system that you ultimately purchase. However, you should not simply consider the price of the unit while purchasing. Remember that there is running and maintenance costs that come with the equipment. You should be able to afford these costs and that needs to be taken into consideration when purchasing the systems.
  • The unit must be energy efficient. Ensure that you are getting the most energy efficient unit for the money that you pay. The running costs will be too much if you select a unit that consumes too much energy without producing good effect.
  • Take into consideration the area that you plan on heating or cooling. Not all appliances are capable to regulate the temperature of a large area. On the other hand, selecting too powerful unit would result in unnecessarily wasting money and energy.

There are many other similar steps that you can take in order to reduce the energy bills of your household. Heating or even cooling a home by a few degrees can be performed easily with a few tricks. The few degrees can make the difference between comfort and distress.

Leave a Reply

Your email address will not be published. Required fields are marked *