10 Most Common Woodworking Mistakes Made By Beginners


Common Woodworking Mistakes

Woodworking is an art that requires your full concentration to achieve it. Being a beginner, it’s common to make mistakes because every master was once a beginner. This article will help you understand the basic woodworking mistakes you could make; this will save you from wasting your time, energy, and money. Before discussing the woodworking mistakes, let’s take a minute and some common tips to be followed as a woodworker.

Firstly it is okay to take time for the output to be perfect. When you have started woodwork that involves more cuts and design, take a break in between and relax. Those cuts will need a steady hand and mind; taking a break will help you achieve the beautiful curves on your wood. The woodworking tools will cost you a fortune, so before buying one, do proper research and buy the ones which will really serve your purpose. Patience is all it takes as a woodworker, which is also a tip recommended by Bill Baum from theedgecutter. Stick to this and continue reading the article to understand the common mistakes a bit more, which you can prevent while working.

Unhygienic Environment

A healthy and clean environment is significant, be it your home or workplace. Woodworking is a master of the art as well as the master of leaving tons of dust; you need to make sure how those specks of dust are cleaned after the work is done. It is understandable that you cannot clean your workspace now and then, but you can clean after the work is done.

It is advisable to have two separate sections in your workplace for building and finishing the work. The dust settling in between the wires of the machine and router bits need to be cleaned first, later the floor. The dust collector will be your handyman to collect dust after the work is completed. Working in a dirty environment should be the last thing you would wish to do because the messed-up environment will always have its way of messing things up.

Lethargic About Your Safety

Compromising your safety is not worth any work. Woodworking, as you know, requires many tools which are sharp and are capable of hurting you. Once you are aware of the basic steps in woodworking, the confidence in you will let you start the work without the safety gears on. This is why this is added as a common mistake. Be it a beginner or a pro in woodworking, starting a huge project, or just cutting the wood, safety gears are a must.

The safety gears consist of hard (of good quality) hand gloves, safety glass, and headgear. Ensure to have these safety gears on you before you start working. The heavy-duty and sharp types of equipment accidentally might surprise you with injuries; it’s better to stay away from this surprise.

Lack Of Knowledge About The Tools

Trusting Everything Naked Eye: How would this be a mistake? Yes, it is the most common mistake you could make in woodworking as a beginner. Always have the spirit level next to you. You have enough knowledge in woodworking, and you will know how difficult it is to make a balanced table or cut your wood to a certain angle. After all, all your efforts are to attain the precision and good finish in your products.

As you work and take a minute to review whether it is right, you will feel right. It is just that your heart and eyes go hand in hand in making you believe your work is right. But that isn’t going to help you get the perfect finish. You will have to check the angle of your work now and then and make sure the surface is equally flat without any deviation. The spirit level will help you achieve it. Though you are confident of your work, it is always best to cross-check to avoid reworking later.

Never Researched Your Wood

Before working with your wood, it is imperative that you understand its qualities and behaviors at high pressure. Because the types of equipment you use might end up breaking the whole wood if the wrong pressure is applied, this is why you must have basic knowledge about your wood. Do full research before you start working on different kinds of woods.

Researching about the woods will also help you have a better knowledge about the work you do. Hope you agree with the point that the wood used in making a door cannot be used in making a cupboard. Research and then start your work.

Don’t Rush

Slow and steady wins the race; it works for a woodworker as well. You will master the art of woodworking only after investing nothing but your precious time. Don’t let your excitement rush you while working. Take it slow, do proper research about your wood, types of equipment, and the kind of work you do. Be consistent to master this art.

And to add to this mistake, do not jump from a half-complete project to a new one. The excitement in you might make you do that; try to avoid it. A half-complete project is more vulnerable than raw materials lying around. Finish a project and then jump to the other.

Not Trying To Correct Your Mistakes

Err is human, and mistakes in woodworking are just fine. There is nothing you can do to undo the wrong curve you made. Unfortunately, most of the mistakes in woodworking cannot be corrected because of the precision you carve for. It all takes you to sit and try to understand where you made a mistake and how it can be corrected in your next try. Try to learn from the mistakes you made in your previous wooden piece instead of throwing it aside.

Not Paying Attention While Ripping

Ripping is the process of cutting the wood along its length. As the cut of wood is quite long, giving your full concentration is essential. Ripping can be performed on a table saw, using your free hand, or using a rip fence. Table saw is often used by woodworkers. While ripping is not successful, you might end up wasting a huge piece of wood.

Start the process slow so that you can visibly see how your woodcut is unfolding. With this slow start, you can achieve the mission ripping without wasting any piece of wood in the process.

Making Dull Blades Your Friend

As you start fresh, the blade seems to obey your words. You cannot expect your blade to behave properly as time passes by because your blade will lose its sharpness. Your blade behaved in the first place because of the sharpness of a new one. When your sharp blade is now a dull blade, your safety and also the work will be at risk.

The dull blades will gift you different curves from the planned ones. Make sure to sharpen your blades with a sharpening tool or at the sharpening local service. You should invest time when buying a blade to ensure it can be sharpened from time to time.

Investing On A Wrong Tool

The knowledge of which tool works for what kind of work is the very first research you should spend your time on. There are many types of woodworking tools that you will eventually put your hands on as you start working, but knowing every tool and its usage is necessary. The tools you buy are expensive, and investing in the wrong tool will affect your financial health and also your wood’s health.

In case you are not sure about the work or the tools to use, ask for a mentor’s help in understanding the tools better. To avoid investing on a wrong tool, you can rent the tools for a while, use it, and then buy if it serves the purpose.

Being The Master Of Router Burns

When you work with woods, it is common to see burn marks. Those burn marks are due to the flat blade or sharp saw. The burn marks can be easily handled with sandpaper. However, the router burns challenge you in this part. Getting a router burn right is more than a task you can ask for.

Router burns occur when the router bits are accumulated with dust. Ensure the router bits are cleaned before you start working.


When you pay attention to the ten most common mistakes in woodworking, as mentioned above, you may have to pay a little more attention to the loose items lying around your workplace. They might end up cracking your wood and costing you a fortune again. Do proper research about the wood, tools, and the work you do before you start any work. You will have a better understanding of the work, and this pre-research habit of yours will make you a master in any field you are in.

The beginner in you should have gained additional knowledge from the mistakes mentioned above. As a beginner in woodworking, it is completely okay to make mistakes, now take a vow to learn from your mistakes. This should help you in not repeating the same mistakes.

Previous articleReal Estate Business In The UK: Effects Due To COVID 19
Next articleTop Tips When Looking To Upgrade Your Plumbing
Preeti Shah is a person who loves checking out different styles and designs of houses. She took interior designing in college and is practicing in the field of home improvement for five years now. In her spare time, she is usually searching the web for interesting and fascinating home designs.


Please enter your comment!
Please enter your name here