Dirty water can make members of your family suffer from a wide range of waterborne diseases. Thus, it is necessary to ensure that water is purified to make it safe for drinking. Even tap water contains chemicals, heavy metals, bacteria, and other contaminants. They all cause health problems. Luckily, we can solve all these issues by cleaning the water. The challenge you may face is choosing an effective method. This is why this article discusses tips that can help you clean water in your home.
Boiling The Water
It is the oldest method that man has relied on to clean and purify drinking water. When water is boiled, it kills contaminants such as bacteria, parasites, and viruses. But you should ensure that the heat range attained kills all the microorganisms. All you have to do is heat the water to the boiling point and leave it to boil for one or two minutes. Let it cool and store it in appropriate containers. Unfortunately, this method may not remove pesticides, nitrates, solvents, and metals.
Installing A Whole House Filter
This method combines both science and technology to purify water. It entails using carbon and filters to purify water. You may also have AquaOx installed to filter our whole house to ensure that you have clean drinking water. The method removes industrial chemicals, including chlorine, to make water safe for drinking. It is the cheapest method you can use to clean drinking water. The only thing you will need to do is to ensure that you change the filters often.
Distillation
In this method, heat the water to high temperatures and condense the resultant vapour. As a result, you will get clean drinking water. Heath organisations advise homeowners to use this method. It removes heavy metals, bacteria, and viruses from water. If combined with filters, the process can eliminate chlorine from water.
Filtration
The method can be used to remove pathogens and turbidity from water. It entails passing the water through filter media. Ceramic and sand may be used to filter water. You may also choose to use membranes and a piece of cloth for the best results. Another option is to install under-sink filters which are proven more effective than pitcher and faucet-mounted filters. But before you do, make sure to test the water for other contamination. One way to check is through testing TDS in the water.
Multi-Barrier Approach
It is the most recommended method since it purifies water through several steps. This method is appropriate if you have a water source on your compound. It calls for the protection of the origin of water by fencing to keep animals at bay. It requires that you move restrooms away from the downstream of your source of water. You should also construct drainage for wastewater. It allows the water to flow away from the water source. After collecting the water, you may enable it to go through the sedimentation process. Let it settle down to remove turbidity. You will then use native plants or special chemicals to make the sand, clay, and silt to coagulate. The water is then filtered and stored.
As a homeowner, you have the freedom to choose a method that guarantees you clean drinking water. But ensure that it removes most of the contaminants and leaves you with safe drinking water.
