We face the type of plumbing issues that homeowners experience. And these are the issues not only including plumbing but also magnitude, complexity, and cost. People face plumbing problems a lot of times, but it doesn’t mean we can not solve them. So let’s see and find ways to solve this common problem.
We will discuss some DIY methods so that they will save money. Let’s take a look.
Slow Drainage Sink
There are times when it takes longer than usual for the water to drain out of the sink. For example, if it’s a kitchen sink, the pipes can be clogged by tiny bits of food that get into it while you wash the dishes. In the case of a bathroom sink, the blockage is caused by hair and soap. This type of blockage can be resolved by adding baking soda, vinegar, or a drain opener.
Dripping Faucet
Dripping faucets are so standard that it’s impossible to find someone who hasn’t experienced this problem in their homes. The sound of a dripping tap is annoying and a waste of water, costing you money. A dripping tap can waste about a thousand gallons of water every year. The cause of a dripping faucet is the hardening and breakage of the washer inside the faucet. Unfortunately, getting rid of a leaking tap is beyond a homeowner’s skill.
Clogged Shower Drain
Not only do bathroom sinks clog, but shower also drains get clogged too. Shower drains get blocked due to soapy water and hair tangled in them. Usually, a plunger or snake is needed to open the shower clog. This can also be done with baking soda or vinegar. Carelessness will clog drains, just like a sink is clogged. If you are using a plunger, try using petroleum jelly on the end of the suction pad.
Toilet Closure
If the toilet bowl fills up to the edge and doesn’t drain, there’s a good chance it’s clogged. This clogging is caused by pieces of tissue paper that you try to remove and pieces of human waste. The plunger can easily remove the toilet drain. If the plunger doesn’t work, try using a drain auger.
Continuously Running Toilet
Running a toilet can waste about 200 gallons of water a day. A faulty flapper valve is the culprit behind running a toilet. It is responsible for controlling the flow of water from the tank to the valve. However, there is nothing to worry about. You can get a toilet repair kit from any nearest hardware store and get rid of the problem.
Faulty Water Heater
This problem is one of the most troubling problems, and interestingly, it is hard to detect. This problem can be seen only when you are in the shower. While you are taking a bath, the water will become cold, which will make you shiver. There are many reasons behind a bad water heater. Usually, this is due to the pilot running out and needing to be re-lit. A faulty water heater can result from a build-up of sediment in the tanks. A thermostat that doesn’t work well can affect the functioning of the water heater.
Low Water Pressure
Have you ever seen one in your bathroom? When the water pressure becomes slow. Because the water pressure is disrupted, and regularly it becomes challenging to wash and bathe things. When this situation occurs, a leak has often happened.
And there is corrosion behind this most common problem.
Leaky Pipes
One of the things that creates leaky pipes is moisture. It makes molds, and mold not only ruins the structure of your home as well as your health. In addition, leaky pipes allow cockroaches and other unhygienic crawlers to enter your home and, day by day, harm your health and finances.
Conclusion
These are some plumbing problems that should not be taken lightly. The first thing you’re tempted to call is a reputable plumber. Always check all the systems of water pipelines at your home that will secure you and your health.
If you are facing any of the above plumbing problems in your home, let a plumber know only if you can’t solve them. For help with all your plumbing issues, reach out to Inner City Plumbing.
