An electric wall-mounted radiator helps you stay warm when the weather gets extremely cold. Besides that, it’s more economical than other types of heaters that warm the entire house. You can actually mount it in one of the rooms you frequent the most. This helps in keeping your monthly heating charges on the lower side. Below are some tips that will help you when mounting an electric radiator.
Keep It Up The Wall
When you have kids and pets in the house, it’s recommended that you avoid mounting the radiator too close to the floor of the house. This is because kids and pets might tamper with it and cause accidents due to electric shocks. Although radiators are safe to touch when turned on, a child or a pet might decide to shower it with its pee. You should avoid such incidents by fixing the radiator somewhere in the middle of the ceiling and the floor to ensure that you will not miss the heat.
Put It At Strategic Position
Since electric wall-mounted radiators are not designed to heat the entire home, you should position it at a central point so that you can utilize it the most. You should therefore avoid mounting it behind doors because most of the heat will be taken in by the wood. Besides that, you should position it away from the window. This helps in preventing the heat from escaping through the window. You should also not fix it in the bathroom because someone might place a wet towel on it and get electrocuted. If you really must mount it in the bathroom, you should hire a qualified electrician to do the wiring.
Follow Instructions
Before you start installing the radiator, it’s recommended that you read the user manual that’s provided by the manufacturer. You should confirm that the voltage of the electric cables matches that of the radiator. A mismatch can cause the appliance to malfunction. When you read the user manual thoroughly, you will be able to tell which side of the radiator should face down. If you mount the radiator with the downside facing upwards, most of the heat will be redirected to the sealing, leaving you still shivering from the cold.
Get The Right Tools
Installing a wall radiator without the right tools can be cumbersome. You should therefore arm yourself with the correct tools before you get started. Some of the most commonly used tools include a power drill, measuring tape, drywall saw, stud finder, wire connectors, and cable ripper. Once you have all the tools, you should start by measuring the space you have reserved for the radiator. This should be followed by drilling the holes that will be used to fasten the appliance on the wall. You should then tap power from the main cables through the wall and connect them with the cables of the radiator. You might need to use the wire ripper to strip the cables.
Switch Off Main Switch
If you start installing the radiator before switching the main switch, you might get shocked by the live wires. It’s therefore recommended that you switch off the mains to ensure you remain safe throughout the installation process. You should only turn the main switch on when testing the radiator. But even before you do that, you should call in a professional technician to come and set the dedicated power circuit for the radiator.
