How To Hide Kitchen Appliance Cords Once And For All


Kitchen Appliance Cords

Kitchen appliance cords can be a nuisance, especially when they’re not hidden away. This guide will show you how to hide your kitchen appliance cords and make them accessible for kitchen appliance repair.

  1. Choose The Right Hiding Place

The first step to hiding your kitchen appliance cords is to choose the right hiding place. You’ll want to consider both function and aesthetics when selecting a hiding place for your cords.

Functionally, you’ll want to choose a location that is close to outlets and easy to access for kitchen appliance repair. Aesthetically, you should select a location that compliments your kitchen design.

Some good hiding places for kitchen appliance cords include:

  • inside cabinets
  • underneath counters
  • behind furniture
  1. How To Hide Cords So That It Is Convenient To Repair Kitchen Appliances?

There are a few ways to hide kitchen appliance cords so that it is convenient to repair kitchen appliances. One way is to use a power strip with a built-in cord wrap. This will allow you to wrap the cord around the power strip so that it is hidden. Another way is to use a cable management system. This will allow you to wrap the cord around the cable management system and then attach it to the wall or underside of the cabinet. This will keep the cord hidden and out of the way.

  1. Hide Cords Behind A Cabinet Or Decorative Trim

One way to hide kitchen appliance cords is to run them behind a cabinet or decorative trim. This can be done by removing the baseboard or trim and drilling a hole through the wall. Then, you can thread the cord through the hole and replace the trim. This will keep the cord hidden and out of sight.

  1. Use A Power Strip With A Built-In Cord Wrap

A power strip with a built-in cord wrap is a great way to keep cords organized and tangle-free. This type of power strip typically has a number of outlets on the front and a cord wrap on the back. The cord wrap can be used to tightly wrap up the cords, keeping them together and out of the way.

This can be especially helpful if you have a lot of cords connected to your devices or if you have a lot of devices that need to be plugged in. By using a power strip with a built-in cord wrap, you can keep your cords neat and organized, making it easier to use your devices.

  1. Hide Cords With A Cable Cover

If you have cords that run along the floor, you can hide them with a cable cover. Cable covers are available in various sizes and colours to match your décor. They are also easy to install and can be cut to fit any length.

  1. Try A Cordless Appliance

A cordless appliance is a great option if you’re looking for more flexibility in where you can use your appliances. Cordless appliances typically use batteries to power them, which means you can move them around your house without having to worry about finding an outlet.

This can be really useful if you have a small kitchen and don’t have enough outlets to plug in all of your appliances. It can also be helpful if you want to move your appliance to another room while it’s in use.

However, there are some drawbacks to cordless appliances. First, they can be more expensive than traditional appliances. Second, they may not be as powerful as their corded counterparts. Finally, they can run out of battery power quickly, so you’ll need to be careful not to use them for too long at a time.

  1. Cut The Cords To The Correct Length

If you have cords that are too long, you can cut them to the correct length. This will help to keep your cords tidy and out of the way. You can use a sharp knife or scissors to cut the cord. Just be sure to leave enough slack so that you can still plug in the appliances.

To cut the cords to the correct length, you will need to measure the distance from the light fixture to where you want the cords to hang. Once you have measured the distance, add a few extra inches to the measurement so that you will have enough cord to work with. Using a sharp pair of scissors, cut each cord to the desired length.

  1. Match Up The Cords With The Plugs

If you have a lot of cords, it can be helpful to match up the cords with the plugs. This will help you to keep track of which cord goes to which appliance. You can use a sharpie or other permanent marker to label each cord.

First, unplug all of the appliances from their power source. Then, label each cord with a Sharpie or other permanent marker. Be sure to write clearly so that you can easily read the labels. Once you have labelled each cord, plug the appliances back in and put them away. Now, when you need to use an appliance, you will know exactly which cord to use.

  1. Tape The Cords In Place

If you have cords that are constantly getting tangled, you can tape them in place. This will help to keep the cords tidy and out of the way. You can use painter’s tape, duct tape, or even washi tape to hold the cords in place.

First, unplug all of your appliances from their power source. Then, locate the cord that is causing the problem and tape it in place. Be sure to leave enough slack so that you can still plug in the appliance. Once you have taped the cord in place, plug the appliance back in and put it away. Now, the cord will be less likely to get tangled.

  1. Plug In And Enjoy

Now that you have your cords hidden, you can plug in and enjoy your appliances. With a little bit of effort, you can keep your kitchen looking neat and tidy.

Previous articleAdding Insulation To Your Existing Home
Next articleHow To Calculate Rent Estimates In 6 Steps
Jinally Shah
Jinally Shah is a co-editor at MyDecorative.Com. She is a role model, especially in Social media Optimization in business and primary tasks, with an understanding of communicating and executing all activities related to referral searches. She works closely with the team and looks after the quality and growth of off-site factors like Social Media Marketing that drive referral growth. In addition, she analyses and creates strategic recommendations for social media promotions.


Please enter your comment!
Please enter your name here