Residential roofs in Australia play an important role in protecting the family from all kinds of weather. It keeps the family comfortable regardless of heavy rains, extreme heat of the sun, snow, and hail outside. It also provides aesthetic appeal to the home and can increase its value if done right.
With so many options today, especially in 2023, it can be confusing to know which one is right for your home in Adelaide. Also, as with any other style, roofs also have trends that come and go. However, this is a very expensive project that some can’t just replace the entire thing on a whim when a specific material goes off-season. Fortunately, most of these trends are proven to be effective, and they can last for decades; below are the top ones that you need to consider.
Top 3 Roofing Trends In 2023
Sustainable And Energy-Efficient Roofs
Green roofing systems allow lower heat transfer and cooler temperatures in the home. When done right, they can decentralize the stormwater systems by significantly reducing runoffs. Ballasted types where vegetation can grow in place of tiles may also be considered, as well as adding an irrigation system that helps drain rain and you can see more about going green on this page here.
Lighter-coloured tiles that reflect the ultraviolet rays of the sun are also an option. These types help the interior to stay cool, and they can boost the effectiveness of a flat roof. Adding solar panels is also a very wise choice since homeowners can significantly save on their utility bills each month while not being too reliant on the grid.
Modern Options In The Form Of Tiles
Tiles are very durable and beautiful, and they can expect to last for many years. Usually, they were made from terracotta, but nowadays, it’s more common for manufacturers to use concrete. One of the best choices for homeowners who are near the beaches is tile roofing systems made of clay that can withstand high winds and hail. They are also resistant to fire but may require maintenance from time to time because they can break on heavy impact.
Slate, concrete, and clay are earth minerals that are pulverized so they can better regulate the temperatures. You can also go into contemporary European styles because of the wide variety of sizes and colours available.
Modified Bitumen Systems
Hybrid types like the mod bits combine polymerized plastic or rubber and asphalt membranes that can last for decades. Additional reinforcements through fibreglass are also added, creating a very strong and flexible material.
Application to residential and commercial properties is available, and they comprise two layers so that they can be more long-lasting. Even if you live in some parts of Australia that are known to have harsh weather throughout the year, you can count on the waterproofing protection and high-tensile strength of the mod bit to create a safe home for you.
Installation processes may include peel-and-stick, which is a more cost-effective method, but they are not very reliable compared to the torch-down technique. The latter often involves professionals for better sealing and defence against rainwater.
You don’t have to change the entire material of your roof for the trends, and fortunately, if you have older tiles, you can still restore them to their former beauty and durability. Some who are planning to restore their homes because they will be selling in the future can get roof tile restoration from the experts for a better look. The entire process can also offer more security and peace of mind for the owners.
Roof Tile Restoration
Repairs And Cleaning
Cracked tiles should be replaced with the same colour and material. Afterwards, the site is pressure cleaned through a water blaster with a minimum of 3000 pounds per square inch. Any dirt, chalkiness, grime, and grit on the pores and craters should be removed. The ends or tile noses are given special attention so they will not end up with a black colour. Any experienced roofer can do this without any problems.
Pointing And Re-Bedding
Loose ridge caps will need a properly done re-bedding by installing a new concrete bed and removing the ridge caps. Straight and neat work is possible with the help of professionals in Australia who have decades of experience doing these kinds of jobs. They are going to mix cement and sand, and a plasticizer is added into the mix where the new caps are going to lay.
After the drying process, the pointing mortar, which is a flexible polymer, is used, and the experts are going to make sure that the roof is flexible enough to cope with any wind movements in the future.
After the foundations are done, the next step is the sealer after the pointing dries. A paint machine is used to apply the primer, and the coverage is going to depend on whether the roof has existing paint on it or if it’s bare. You’ll typically use more with the former, and the thickness can depend on the previous coating, especially if they are more pronounced.
Filler coats are used next to smooth out the surface and result in a better-looking finish. Avoid visible patches and apply the topcoats from the gutter to the ridge. This pattern will decrease the marks in the coating, which can be very important in metal tiles where the join marks can be more visible.
Experts will generally angle the paint gun towards the tile nose since thicker coverage is needed for them. Other applicators may spray super thick coverage to avoid amateurish-looking results.
Ask the local roofers about their services, as their materials can change from time to time. Get info about the different materials on this website: https://www.service.com.au/articles/roofing/what-type-of-roof-lasts-the-longest.
Replacing or installing brand-new tiles are options that are totally up to you, so if you think that this is the perfect time to spruce up the looks of your property, then don’t hesitate to know more about the costs, trends and other projects available that’s totally within your budget.