How To Clean A Fiberglass Shower?

0
308

It can be a contradiction to pretend to be clean in a dirty shower. However, fiberglass can restore the clean, new look it used to have. So, you can keep reading to avoid thinking that your shower is ruined.

This is a quick and simple procedure that you can do yourself. You only need to have a fiberglass tub cleaner. Along with this, you can add some accessories and products that everyone has at home. Finally, the secret ingredient is some time for your products to work on the dirt.

Therefore, below we indicate step by step the efficient cleaning procedure. So, having a fiberglass shower like new will be very simple.

Pre-Preparation

Pre-Preparation

First, you need to empty your shower. This includes removing bathroom supplies such as razors, soaps, and bottles. Along with this, it will be necessary to clean each of these accessories properly. It will be a pity if these dirty implements spoil the work you do in your shower.

In particular, it is recommended that you clean off the mold that is on the bottom of the bottles. In this way, you will have a much cleaner, but also a healthy bathroom. At the same time, it is a good opportunity to dispose of worn or empty implements. It is also a great time to take advantage of and clean your shower curtain if you have one.

As a next step, it is advisable to remove any kind of debris and loose dirt in your shower. This will allow the cleaning products you apply to act more efficiently. Also, you will allow your bath to have good water drainage.

An excellent way to prevent moisture and vapors from building up is to use ventilation. To optimize the time, you can open the door of your shower, together with the door of the bath. At the same time, incorporate a fan to allow air to circulate more efficiently.

Of course, it is useful to open the bathroom window if you have one. In this case, you will have proper ventilation before applying the cleaning accessories.

Getting The Cleaning Solution

Getting The Cleaning Solution

The procedure to get the cleaning solution is simple to do. First of all, you can take a liquid dishwashing detergent. Here you only need to pour 79 ml into a spray bottle. In this case, it is an excellent product for dissolving fats and oils in general. At the same time, the dirt in the shower is largely human grease and oils that remain impregnated.

Therefore, hard dirt on the surfaces of your shower can be dissolved. It does not matter too much about which specific formula of cleaning detergent you use. Also, using too much detergent will not be a problem, although the rinsing process will be more difficult.

As a next step, you can use some white vinegar as a secret and definitive ingredient. In particular, this product attacks mold and bacteria efficiently. Besides, it is a good option for removing lime deposits and soap scum itself. To complete the formula, you should add 237 ML of white vinegar.

For some people, the smell of vinegar can be somewhat unpleasant. To solve this inconvenience, you can use some orange oil, lemon oil, or something similar. Just adding a few drops will be more than enough for a pleasant aroma.

It is necessary to achieve a good mixture of vinegar and detergent. To facilitate this process, you can heat the vinegar for one minute in a microwave. So you must take into account that cold vinegar is more difficult to mix. However, remember that you should not boil the vinegar, but only heat it.

Finally, you just need to add the vinegar to your spray bottle and mix both ingredients. By making circular movements, you will be able to prepare your solution adequately. It is essential not to make sudden movements or shake the bottle. This would only produce foam on the inside, which we do not want.

The solution should, therefore, have a foamy texture and be the color of the detergent. Depending on the level of dirt in your shower, you can increase the vinegar or the detergent a little.

Applying The Solution

Applying The Solution

In this case, you should only spray the solution on all surfaces of your bath and shower. It is essential to let these ingredients act for about 15 minutes. During this time, the detergent and vinegar will penetrate the dry mineral deposits, mold, soap scum, and society in general.

If the dirt in your shower does not have this level, it is not necessary to let the solution act for 15 minutes. After that, you should have a soft-bristled brush, a clean cloth, or sponge. You will need to float the entire surface of your shower. However, it is not necessary to apply too much force. It would not be advisable to end up scratching the fiberglass.

Finally, you only need cold water for rinsing. Simply splashing water on the surfaces, you have worked on will be more than enough. Depending on the level of soiling, you will need more or less water to do this.

FAQ´s

Is It Possible To Restore The Brightness Of The Fiberglass?

Not only is it possible, but it is also simple. Just sprinkle some baking soda on the desired area, and use a damp sponge on it. Note that you only need to rub the area gently.

Oxidation Is Removed With Vinegar?

Yes, you can use some vinegar to remove general oxidation from the fiberglass.

Is The Fiberglass Damaged By Vinegar?

When you use the proper amount of white vinegar, you will be able to clean the fiberglass without damage. It is also essential to gently rub the area to be cleaned.

Final Words

We can conclude by mentioning that this is a simple and quick procedure that you can perform. So when you know how to clean a fiberglass shower, your shower will be as good as new. Besides, you will be able to enjoy a cleaner, healthier, and more pleasant bath.

LEAVE A REPLY

Please enter your comment!
Please enter your name here