3 DIY Tips for Repairing Your Air Conditioner

On August 15, 2018 by Preeti

3 DIY Tips for Repairing Your Air Conditioner

There is nothing worse than an air conditioner failure in the height of summer weather. When you must wait for heating, ventilation and air conditioning (HVAC) techs to arrive, you will pay anything to get air conditioner repairs completed. For someone who has experience with this type of repair, it will be cheaper to fix oneself. Here are three tips for your air conditioner that HVAC professionals recommend for do-it-yourself repairs.

Before you begin, you will need to gather a few accessories including a voltage sniffer, multimeter, socket set and a variety of screwdrivers. If you are unable to fix the issues, you will have at least covered the basics so that your service repairmen can search for larger issues.

There are two primary components including the condensing unit that is housed outdoors and the evaporator coil that is located within your furnace air handler. The condensing unit has three parts that a person can replace including the start capacitor, contractor and fan motor.

The A-coil does not contain any parts that a newbie should try to repair. It is best to call the experts at R.A. Styron Heating & Air before working on major issues to avoid any damage.

  1. Define That the Issue Is Not Furnace Related

Define That the Issue Is Not Furnace Related

Before doing anything repair related, you need to confirm it is an A/C issue and not a furnace problem. Make sure your thermostat is set to air and turn down the setting. If the furnace turns on, it is not the problem. If the fan does not function, check your circuit breaker to see if it is electrically related. You can also check the condensing unit. The compressor and fan should function. If the fans still fail to start, call an expert.

  1. Give Your Unit a Thorough Cleaning

Give Your Unit a Thorough Cleaning

Air conditioner units take in a lot of air pollution, which requires a good cleaning from time to time. Turn the unit to the off position. Take the time to clean the fan blades, which will remove debris that is problematic. You also need to clean the condenser guards as well. You need to take the utmost care of these parts as it is easy to bend or break the parts.

  1. Steps to Take When Air Conditioning Does Not Cool Home At All

Steps to Take When Air Conditioning Does Not Cool Home At All

Using your voltage sniffer, open the electrical box near the condenser to confirm the power is off. Next, make sure the air ducts in the home are open. Check the filter to confirm it is clean. You then want to clean the condenser coils. If you are still not getting cold air, turn the thermostat to the off position. You now need to check to see if the A-coils are iced over. Turn the fan switch to on and let the air fans blow through the air ducts for a half hour. Turn the thermostat to the A/C setting to see if it works.

The three tips above will save you money and the need for expert intervention. When it comes to more serious issues, all major air conditioning needs should be handled by the professionals.

Leave a Reply

Your email address will not be published. Required fields are marked *