You may not use your oven every day. However, it is an integral part of your kitchen. Why? Well, because you cannot bake your cookies, bread or heat a frozen pizza without it. So, when it breaks down, you have every reason to get worried. Still, you can get your oven working again if you repair it with a reliable appliances repair company. What follows is a rundown of common oven faults and how to deal with them.
The Garn Burner Won’t Light
You can light a range of burners if you own a gas stove. However, if the burners won’t light, then it’s an indication that everything is not correct. The first thing that you do is to try and troubleshoot your unit. Here’s how to do it;
- Start by lifting off the burner gate, base, and cap.
- Wipe all the food debris out of the burner. You can also use a toothpick or compressed air to clean any food deposits.
- Clean the grate and cap.
- Inspect the wires connecting the control module and the igniter. Tighten any loose connection.
- What if your burner won’t light? In such a scenario, you may have to replace the igniter. Note – the problem could be a kink the system gas line.
The Range Burner Will Not Heat
You may not need electricity to heat your range burners if you have an electric stove. If one of the burner malfunctions, you have to replace it. If one of your electric burners won’t heat up, here’s what you need to do.
- Start by switching off the faulty burner with the one that is working. Unplug it from your burner and plug to the functioning one.
- Replace the working burner if it heats up.
- Replace the socket or infinite switch if the working burner doesn’t heat up. Be sure to check if the socket appears damage.
- Test your burner again and replace the infinite switch if your burner doesn’t heat up.
The Oven Won’t Heat
A defective igniter is a primary reason your oven won’t heat. A faulty heating element could also be a problem if you own an electric oven. If your gas oven and burner are not working, you need to check the gas line. You can replace the igniter yourself by following these steps;
- Detach the heating element or igniter using a screwdriver. For starters, the heating element is inside the oven, and you can access it from underneath the unit.
- Ensure that you turn off the power before working on your oven.
The Oven Won’t Heat to the Right Temperature
In such cases, you could be dealing with a faulty temperature sensor, the heating element of the gas igniter. Here’s how to sort out the problem;
- Start by checking the temperature sensor. Make sure that it is not in contact with the inside wall of your oven.
- Check if the sensor is working using an ohmmeter. Ensure that the resistance is rising as the temperature of your oven increases.
- Check to see if the heating gas igniter and heating elements are working. Replace them if they’re not.
- Replace and recalibrate your oven after checking everything.
- Heat your oven to 350 degrees Fahrenheit. Measure the temperature inside your oven with a thermometer at intervals of 20 minutes. After that, check the temperature after 90 minutes and two hours.
- Sum up the reading and divide by the number of readings. The idea is to get the average temps of your oven.
- Fine-tune your oven’s temperatures accordingly
The Oven Door Won’t Shut
You shouldn’t use an oven that won’t shut because it is unsafe. Here’s how to fix it.
- Unplug your unit and turn off the gas
- Detach the door by pulling it straight up. Check to see if there are screws if you can’t pull up the door.
- Look for broken springs. Slide-out your oven’s drawer and check below to get a better view of the springs
- Remove broken springs with pliers and replace them. Be sure to replace the rubber gasket and silicone around the oven’s door.
- You may need to replace the door if it doesn’t shut.
When You Need to Call a Professional
It makes perfect sense to hire a professional to check your oven if you don’t have the knowledge required to fix it. See, oven repairs can be complicated, especially if you have no idea what is wrong with your unit. With an expert on your side, however, it is easy to get your oven working again and most importantly get the entire unit inspected.