To apply wall art decals in a bedroom, start with a clean, fully dry drywall surface (wait about two weeks after painting). Position the decal with masking tape to create a hinge, peel the backing paper from one side, and press the vinyl onto the wall from the top center outward with a spreader. Remove the transfer tape slowly from the corners and smooth the decal with a dry towel. Avoid textured, stucco, brick, or wood-paneled walls, and use a hair dryer to remove decals safely later.

Having wall art decals for your bedroom can be a bit intimidating at the start, especially if you haven’t seen applying it on the walls before. Various effortless and elementary wall arts have been created, which you can choose for your bedroom wall. Are you confused about them but have to deal with it?

These wall decals are removable, so if they don’t satisfy you, you can take them with you and never leave behind a muggy leftover.

It won’t cause any destruction to the walls if you remove it. Let’s clear your confusion, as we are here with a detailed guide on how to apply wall art decals to your bedroom so that you can apply them at home without any struggle.

How to Aspire Wall Art Decals?

Aspect Wall Art Decals are the stickers that people use for their room walls and are also used on bathroom walls. Once you are done with wall stickers, you are only left with vinyl wall stickers. Decals are made of PVC-vinyl because you need the elasticity that plasticizers provide. Whenever you go through the vinyl decal, it means that it is made of soft PVC vinyl. Let’s get together and discuss step-by-step instructions on how to apply them on the walls.

• Apply It to Drywall

Ensure that the wall you have chosen for applying it is free from any grease or dirt. The wall art is done on drywall, so if you have just painted the wall, wait for a couple of weeks to get it dried. Later, when you are sure the wall is completely dry, you can go ahead and apply it. Sugar Soap or similar products can be used to check if the wall is dry, but this is optional.

• Put In Vinyl Stickers

It requires natural steps to bear it on the wall to make it look as pretty and stimulating as a picture. You only need to have scissors, a tape measure, a level, and masking tape to complete the work. Let’s discuss the process of applying the stickers in detail:

1. Spot the location where you want to use it and then thoroughly dry that spot from every angle. Vinyl stickers do not stick on the dirt or dust.
2. Once you are sure the wall is dirt-free, use masking tape to position the sticker on the wall. Masking tape is usually used to create a ‘hinge’ in the center of the wall decal.
3. Later, remove the backing; otherwise, the sticker won’t stick to the wall. Fold one side of the sticker and remove it. You may also use tape for sticking. To remove the backing, you need to reach the ‘hinge’ part.
4. The next step requires the removal of the transfer tape. Start removing it from the corners and place the sticker on the wall. If you have a hard surface wall, don’t press the stickers too hard, as excessive pressure can damage them.
5. Remove the transparent paper from the sticker surface.
6. Once you are done, smooth the sticker with a dry towel to finish applying it to the wall with ease and comfort.

How to Apply a Sticker on a Perfect Level

After removing the backing paper, hold the sticker’s corners and attach it to the required surface. Keep it still until you are not satisfied with the positioning. Use a FREE spreader that helps you stick the sticker on the walls by applying equal pressure on every side.

Start attaching the sticker from the top middle, later move to the left side, and then switch to the right side. Similarly, start from the bottom center and repeat the same process. If your stickers are too long to hold, use another person’s hands so that they can keep them carefully.

Continuously lay the decal face down before expelling the backing paper and strip it away from the transparent application tape instead of the next route round. This will guarantee that the vinyl holds to the application tape and is significantly less likely to remain adhered to the backing paper.

Surfaces Required For Wall Decals

Before you make a decision to apply wall decals in your bedroom, remember that you can’t apply them anywhere you want. It requires a specific and suitable position that you can reach. The wall you choose for the stickers should be water-resistant and free of spots, as these stickers can’t be applied to such walls.

The walls that consist of dense textures or walls containing concentrated blocks, suede paints, stucco, sand paints, and bricks should not have any decals. If your walls have wood paneling, don’t apply there too. As for wallpapers, yes, these stickers can be used on some types, but not all.

You can use them on windows and tiles, but don’t go for rough walls because they will not resist for a long time. When you remove the decals from the wall, it will not cause any damage, but to be safe, use a blow dryer at the end. The best way to remove wall art is to apply heat. It will not remove the paint, and it will leave the paint undamaged.

Final Thoughts

Here is a detailed article on decal walls that almost everyone acknowledges because, if you place them nicely, they enhance your room’s beauty. From simple to heavy designs, you have various options to choose from based on your will and requirements. I have likewise mentioned the places or points where it is inappropriate to apply these stickers. You can easily remove these stickers later. I hope you will find this article helpful and informative. Do apply in your rooms and create a bit of change.

FAQs: Applying Wall Art Decals in Your Bedroom

1. How do I apply wall art decals in my bedroom without bubbles?

Clean the wall, mark the position with masking tape, and peel the backing from one side at a time. Press the decal on from the top centre outward with a spreader, which pushes air out evenly and keeps the vinyl smooth.

2. How long should I wait to apply decals on freshly painted walls?

Wait at least two weeks so the paint cures fully. Applying vinyl to a wall that is still drying can cause poor adhesion and may pull the paint off when you peel the decal away.

3. Which wall surfaces are not suitable for wall decals?

Avoid heavily textured walls, stucco, concrete block, brick, suede or sand paint finishes, and wood paneling. These surfaces stop the vinyl from making full contact, so the decal peels sooner than expected.

4. What tools do I need to put up a wall decal at home?

You need scissors, a tape measure, a level, masking tape, a spreader, and a dry towel. Together they help you position the decal accurately and smooth it without stretching the vinyl.

5. Can I remove wall art decals without damaging the wall?

Yes, on a properly prepared surface. Warm the decal gently with a hair dryer to soften the adhesive, then peel it back slowly at a low angle. This protects the paint and leaves no sticky residue.